COMPATIBILITY TESTER

| Back



USE : Instrument is used to find out the compactibility % of moulding sand

SPECIFICATIONS : This accessory is used with Sand Rammer. Place the Compactibility specimen tube in the pedestal cup of Sand Rammer. Fill the sand in the specimen tube through Tube Filler Accessory till sand overflows. Scrape out the excess sand with the knife provided. Place the tube with cup under the rammer plunger. Proper ram by plunger. Remove the tube from the rammer. Insert the compactibility scale vertically in such way so the zero of the mark touches the surface of the specimen. Read the division coinciding with the edge of the specimen tube. The reading gives direct value of percentage compactibility of the sand. Use Tube Filler Accessory to better and consistence result of compactibility. Compactibility Tester is included with Compactibility Tube, Compactibility Scale, Knife to scrape-out sand.



Dimensions and Weights (Approximate)
Length  :  150 mm (6")
Width    :  75 mm (3")
Height   :  75 mm (3")
Weight  :  0.7kgs.